Akuvox A05 Series - FTP Notification Setting

A05 Admin Guide
AKUVOX SMART INTERCOM www.akuvox.com
38
 Sender's email address: enter the sender’s email address from which the
email notification will be sent out.
 Receiver's email address: enter the receiver’s email address.
 Receiver’s Email Name: enter the name of the email receiver.
 SMTP server address: enter the SMTP server address of the sender.
 Port: enter the port number from which the email is sent out.
 SMTP user name: enter the SMTP user name, which is usually the same
with sender’s email address.
 SMTP password: configure the password of SMTP service, which is same
with sender’s email address.
 Email subject: enter the subject of the email.
 Email content: compile the emails contents according to your need.
10.2.2. FTP Notification setting
If you want to receive the security notification via FTP, you can configure the
FTP notification on the web interface properly. To configure the configuration
on web Setting > Action > FTP Notification interface.
Parameter Set-up:
 FTP server: enter the address (URL) of the FTP server for the FTP
notification.