Akuvox A05 Series - Page 39

A05 Admin Guide
AKUVOX SMART INTERCOM www.akuvox.com
32
Parameter Set-up:
 Trigger Electrical Level: select the trigger electrical level options between
“High” and “Low” according to the actual operation on the exit button.
 Action to execute: set actions to be triggered by the input. FTP, TFTP,
Email and HTTP URL actions are supported.
 HTTP URL: to set HTTP URL.
 Action Delay: set the action delay timing (Ranging from 1-300 Sec.) For
example, if you set the delay time as “5”. then the action will not be
triggered until 5 seconds after input status changed.
 Execute Relay: set up relays to be triggered by the input.
 Door Status: display the status of input signal.