Alcatel-Lucent 7210 SAS M - Page 225

Hardware Commands
Page 220 7210 SAS M, T, X, R6, R12, Mxp Interface Configuration
Guide
Fan tray number : 1
Status : up
Speed : half speed
-------------------------------------------------------------------------------
Power Supply Information
Number of power supplies : 2
Power supply number : 1
Configured power supply type : ac single
Status : up
AC power : within range
Power supply number : 2
Defaulted power supply type : none
Status : not equipped
===============================================================================
*A:MTU-A#
*A:MTU-A# show chassis power-supply
===============================================================================
Chassis Information
===============================================================================
Power Supply Information
Number of power supplies : 2
Power supply number : 1
Configured power supply type : ac single
Status : up
AC power : within range
Power supply number : 2
Defaulted power supply type : none
Status : not equipped
===============================================================================
*A:MTU-A#
Sample output for 7210 SAS-X:
A:7210-SAS-X>show# chassis
===============================================================================
Chassis Information
===============================================================================
Name : SASX2595
Type : 7210 SAS-X 24F 2XFP-1
Location :
Coordinates :
CLLI code :
Number of slots : 2
Number of ports : 26
Critical LED state : Off
Major LED state : Off
Minor LED state : Off
Over Temperature state : OK