Alcatel-Lucent 7210 SAS M Interface Configuration Guide

Hardware Commands
Page 230 7210 SAS M, T, X, R6, R12, Mxp Interface Configuration
Guide
CPM Output — The following table describes the output fields for a CPM card.
Label Description
Slot
The slot of the card in the chassis.
Card Provisioned
The SF/CPM type that is configured for the slot.
Card Equipped
The SF/CPM type that is actually populated in the slot.
Admin State
Up — The SF/CPM is administratively up.
Down — The SF/CPM is administratively down.
Operational
State
Up — The SF/CPM is operationally up.
Down — The SF/CPM is operationally down.
BOF last modified
The date and time of the most recent BOF modification.
Config file ver-
sion
The configuration file version.
Config file last
modified
The date and time of the most recent config file modification.
Config file last
modified
The date and time of the most recent config file modification.
Config file last
saved
The date and time of the most recent config file save.
CPM card status active — The card is acting as the primary (active) CPM in a
redundant system.
standby — The card is acting as the standby (secondary) CPM in a
redundant system.
Administrative
state
Up — The CPM is administratively up.
Down — The CPM is administratively down.
Operational
state
Up — The CPM is operationally up.
Down — The CPM is operationally down.
Serial number The compact flash part number. Not user modifiable.
Firmware revi-
sion
The firmware version. Not user modifiable.
Model number The compact flash model number. Not user modifiable.
Size The amount of space available on the compact flash card.
Free space The amount of space remaining on the compact flash card.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English