Alcatel-Lucent 7210 SAS M Interface Configuration Guide

Hardware Commands
Page 236 7210 SAS M, T, X, R6, R12, Mxp Interface Configuration
Guide
-------------------------------------------------------------------------------
Egress Internal CAM : 0
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Sap Egress ACL resource : 2 (def)
-------------------------------------------------------------------------------
Mac and IPv4 Resource : 2 Mac-only Resource : disable
IPv6 128 bit Resource : disable Mac and IPv6 64 bit Resour*: disable
-------------------------------------------------------------------------------
===============================================================================
* indicates that the corresponding row element may have been truncated.
# indicates that the value will take effect only after reboot or clear card.
7210SAS>show#
mda
Syntax mda [ slot [/ mda ]] [detail]
Context show
Description This command displays MDA information.
If no command line options are specified, a summary output of all MDAs is displayed in table format.
Parameters slot — The slot number for which to display MDA information.
mda — The MDA number in the slot for which to display MDA information.
Values 1 — 2 (for 7210 SAS-M)
Values 1 (for 7210 SAS-X)
detail — Displays detailed MDA information.
Output MDA Output — The following table describes MDA output fields.
Label Description
Slot
The chassis slot number.
MDA
The MDA slot number.
Provisioned MDA-
type
The MDA type provisioned.
Equipped MDA-
type
The MDA type actually installed.
Admin State
Up — Administratively up.
Down — Administratively down.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English