Alcatel-Lucent 7210 SAS M - Page 242

Interface Configuration
7210 SAS M, T, X, R6, R12, Mxp Interface Configuration Guide Page 237
Sample Output
*A:MTU-A# show mda
===============================================================================
MDA Summary
===============================================================================
Slot Mda Provisioned Equipped Admin Operational
Mda-type Mda-type State State
-------------------------------------------------------------------------------
1 1 m24-100fx-1gb-sfp m24-100fx-1gb-sfp up up
===============================================================================
*A:MTU-A#
MDA Detailed Output — The following table describes detailed MDA output fields.
Ops State
Up — Operationally up.
Down — Operationally down.
Label Description
Slot
The chassis slot number.
Slot
The MDA slot number.
Provisioned Pro-
visioned-type
The provisioned MDA type.
Equipped Mda-
type
The MDA type that is physically inserted into this slot in this chassis.
Admin State
Up — The MDA is administratively up.
Down — The MDA is administratively down.
Operational
State
Up — The MDA is operationally up.
Down — The MDA is operationally down.
Maximum port
count
The maximum number of ports that can be equipped on the MDA card.
Number of ports
equipped
The number of ports that are actually equipped on the MDA.
Transmit timing
selected
Indicates the source for the timing used by the MDA.
Sync interface
timing status
Indicates whether the MDA has qualified one of the timing signals
from the CPMs.
Label Description (Continued)