Interface Configuration
7210 SAS M, T, X, R6, R12, Mxp Interface Configuration Guide Page 259
Collect Stats
Enabled — The collection of accounting and statistical data for the
network Ethernet port is enabled. When applying accounting policies
the data by default will be collected in the appropriate records and
written to the designated billing file.
Disabled — Collection is disabled. Statistics are still accumulated
by the IOM cards, however, the CPU will not obtain the results and
write them to the billing file.
Down-When-Looped
Shows whether the feature is enabled or disabled.
Down On Int. Error
Indicates if down-on-internal-error is enabled or not.
CRC Mon SD Thresh
Indicates if signal-degrade threshold is configured or not.
CRC Mon SF Thresh
Indicates if signal-fail threshold is configured or not.
CRC Mon Window
Displays the value of window size used for CRC error monitoring
when the signal-degrade or signal-fail thresholds are configured.
Egress Buf (Acc)
The access-buffer policy for the egress buffer.
Egress Buf (Net)
The network-buffer policy for the egress buffer.
Ingress Buf
(Acc)
The access-buffer policy for the ingress buffer.
Ingress Pool
Size
The amount of ingress buffer space, expressed as a percentage of the
available buffer space, that will be allocated to the port for ingress
buffering.
Configured
Address
The base chassis Ethernet MAC address.
Hardware Address
The interface's hardware or system assigned MAC address at its
protocol sub-layer.
Errors Input/
Output
For packet-oriented interfaces, the number of inbound packets that
contained errors preventing them from being deliverable to a higher-
layer protocol. For character-oriented or fixed-length interfaces, the
number of inbound transmission units that contained errors preventing
them from being deliverable to a higher-layer protocol.
For packet-oriented interfaces, the number of outbound packets that
could not be transmitted because of errors. For character-oriented or
fixed-length interfaces, the number of outbound transmission units that
could not be transmitted because of errors.
Label Description (Continued)
To Next Page
Loading...
