Interface Configuration
7210 SAS M, T, X, R6, R12, Mxp Interface Configuration Guide Page 291
Oversize Pckts   :                   0  Jabbers          :                   0 
Collisions       :                   0 
Octets                         :             3468749   
Packets                        :               25439   
Packets of 64 Octets           :               25370   
Packets of 65 to 127 Octets    :                4987   
Packets of 128 to 255 Octets   :               10937   
Packets of 256 to 511 Octets   :                   0   
Packets of 512 to 1023 Octets  :                   0   
Packets of 1024 to 1518 Octets :                   0   
Packets of 1519 or more Octets :                   0   
===============================================================================
Etherne t-Like Me dium Statistics  Output Fields Ethernet-like Medium Statistics Output — The following table describes Ethernet-like medium 
statistics output fields. 
Ethernet-like Medium Statistics — the following table describe Ethernet-like Medium Statistics field..
Label Description  
Alignment Errors
The total number of packets received that had a length (excluding 
framing bits, but including FCS octets) of between 64 and 1518 octets, 
inclusive, but had either a bad Frame Check Sequence (FCS) with an 
integral number of octets (FCS Error) or a bad FCS with a non-integral 
number of octets.
FCS Errors
The number of frames received on a particular interface that are an 
integral number of octets in length but do not pass the FCS check. 
SQE Errors
The number of times that the SQE TEST ERROR is received on a par-
ticular interface. 
Label Description
Alignment Errors
The total number of packets received that had a length (excluding 
framing bits, but including FCS octets) of between 64 and 1518 octets, 
inclusive, but that had either a bad Frame Check Sequence (FCS) with 
an integral number of octets (FCS Error) or a bad FCS with a non-inte
-
gral number of octets.
FCS Errors
The number of frames received that are an integral number of octets in 
length but do not pass the FCS check.
SQE Errors
The number of times that the SQE TEST ERROR is received.
CSE
The number of times that the carrier sense condition was lost or never 
asserted when attempting to transmit a frame.