Alcatel-Lucent 7210 SAS M Interface Configuration Guide

LAG Commands
Page 318 7210 SAS M, T, X, R6, R12, Mxp Interface Configuration
Guide
*A:dut-c# show lag 1 detail
===============================================================================
LAG Details
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Lag-id : 1 Mode : access
Adm : up Opr : up
Thres. Exceeded Cnt : 5428 Port Threshold : 0
Thres. Last Cleared : 05/18/2009 11:57:56 Threshold Action : down
Dynamic Cost : false Encap Type : dot1q
Configured Address : 00:ab:00:5a:01:1c Lag-IfIndex : 1342177281
Hardware Address : 00:ab:00:5a:01:1c
Hold-time Down : 0.0 sec Uplink : No
LACP : enabled Mode : active
LACP Transmit Intvl : fast LACP xmit stdby : enabled
Selection Criteria : highest-count Slave-to-partner : disabled
Number of sub-groups: 1 Forced : -
System Id : 00:ab:00:5a:01:01 System Priority : 32768
Admin Key : 32768 Oper Key : 32768
Prtr System Id : 00:9a:9a:ba:ba:60 Prtr System Priority : 32768
Prtr Oper Key : 32768
-------------------------------------------------------------------------------
Port-id Adm Act/Stdby Opr Primary Sub-group Forced Prio
-------------------------------------------------------------------------------
1/1/3 up active up yes 1 - 32768
1/1/4 up active up 1 - 32768
-------------------------------------------------------------------------------
Port-id Role Exp Def Dist Col Syn Aggr Timeout Activity
-------------------------------------------------------------------------------
1/1/3 actor No No Yes Yes Yes Yes Yes Yes
1/1/3 partner No No Yes Yes Yes Yes Yes Yes
1/1/4 actor No No Yes Yes Yes Yes Yes Yes
1/1/4 partner No No Yes Yes Yes Yes Yes Yes
===============================================================================
*A:dut-c#
Adm
Displays the member port administrative state.
Active/stdby
Indicates that the member port is selected as the active or standby link.
Opr
Indicates that the member port operational state.
Primary
Indicates that the member port is the primary port of the LAG.
Sub-group
Displays the member subgroup where the member port belongs to.
Priority
Displays the member port priority.
Label Description (Continued)

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English