Alcatel-Lucent 7210 SAS M Interface Configuration Guide

LAG
Page 48 7210 SAS M, T, X, R6, R12, Mxp Interface Configu-
ration Guide
PBB VPLS service:
Originating PBB BEB traffic
(that is, I-SAP to B-SAP)
IP traffic (learnt): Source and Destination IP,
Source and Destination L4 ports
IP traffic (unlearnt): Source and Destination
IP, Source and Destination L4 ports, Ingress
Port-Id
L2/non-IP traffic (learnt): CSA, CDA,
EtherType, VLAN
L2/non-IP traffic (unlearnt): CSA, CDA,
EtherType, VLAN, Ingress Port-Id.
PBB VPLS service:
Terminating PBB BEB traffic
(that is, B-SAP to I-SAP)
IP traffic (learnt): CSA, CDA
IP traffic (unlearnt): CSA, CDA, Ingress Port-
Id
L2/non-IP traffic (learnt): CSA, CDA,
EtherType
L2/non-IP traffic (unlearnt): CSA, CDA,
EtherType, Ingress Port-Id.
PBB Epipe service:
Originating PBB BEB traffic
(that is, PBB Epipe I-SAP to B-
SAP)
IP traffic: Source and Destination IP, Source
and Destination L4 ports, Ingress Port-Id
L2/non-IP traffic: CSA, CDA, EtherType,
VLAN, Ingress Port-Id
PBB Epipe service:
Terminating PBB BEB traffic
(PBB Epipe SAP to B-SAP)
IP traffic: CSA, CDA
L2/non-IP traffic: CSA, CDA, EtherType
LAG Hashing Fields used for 7210 SAS-M (Network
mode)
Table 7: LAG Hashing mechanism for services configured in Network Mode on 7210 SAS-
M devices
Services and Traffic Direction
(For example: SAP to SDP)
Packet fields used for Hashing for different
traffic types

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English