Card, Adapter Card, and Port Command Reference
Page 126 7705 SAR OS Interface Configuration Guide
timeslots
Syntax timeslots timeslots
no timeslots
Context config>port>tdm>ds1>channel-group
config>port>tdm>e1>channel-group
Description This command defines the list of DS0 timeslots to be used in the DS1 or E1 channel group. The
timeslots do not need to be consecutive.
The no form of this command removes DS0 timeslots from a channel group.
Default 1 to 24 — channel groups configured under DS1
2 to 16, 18 to 32 — channel groups configured under E1 (ATM)
2 to 32 — channel groups configured under E1 (PPP)
Parameters timeslots — specifies the timeslot(s) to be associated with the channel group. The value can consist
of a list of timeslots. Each member of the list can either be a single timeslot or a range of
timeslots.
Values 1 to 24 for DS1 interfaces
2 to 32 for E1 interfaces
To Next Page
Loading...
