Alcatel-Lucent 7705 - Changing the Adapter Card Configuration

7705 SAR Interfaces
7705 SAR OS Interface Configuration Guide Page 141
The following example shows the details of an adapter card in slot 4.
*A:ALU-1># show mda 1/4 detail
===============================================================================
MDA 1/4 detail
===============================================================================
Slot Mda Provisioned Equipped Admin Operational
Mda-type Mda-type State State
-------------------------------------------------------------------------------
1 4 a16-chds1 a16-chds1 up failed
MDA Specific Data
Maximum port count : 16
Number of ports equipped : 16
Network ingress queue policy : default
Network ingress fabric policy : 1
Access ingress fabric policy : 1
Fabric Stats Enabled : FALSE
Capabilities : TDM, PPP, ATM, CEM
Min channel size : PDH DS0 Group
Max channel size : PDH DS1
Max number of channels : 256
Channels in use : 0
CEM MDA Specific Data
Clock Mode : adaptive
Hardware Data
Part number : Sim Part#
CLEI code : Sim CLEI
Serial number : mda-4
Manufacture date : 01012003
Manufacturing string : Sim MfgString mda-4
Manufacturing deviations : Sim MfgDeviation mda-4
Administrative state : up
Operational state : failed
Failure Reason : Mda initialisation complete failed mda 4
Software version : N/A
Time of last boot : N/A
Current alarm state : alarm active
Base MAC address : a4:58:01:04:00:01
===============================================================================
*A:ALU-1>#