Card, Adapter Card, and Port Command Reference
Page 178 7705 SAR OS Interface Configuration Guide
CEM SAP Configuration Information
Endpoint Type The type of endpoint
Bit-rate The number of DS0s or timeslots in the channel group
Payload Size The number of octets contained in the payload of a TDM PW packet
when the packet is transmitted
Jitter Buffer The size of the receive jitter buffer, expressed in milliseconds
Use RTP Header Whether RTP headers are used in CES packets (Yes or No)
CAS Framing The type of CAS framing
Effective PDVT The peak-to-peak packet delay variation (PDV) used by the circuit
emulation service
Since the operating system may adjust the jitter buffer setting in order
to ensure no packet loss, the configured jitter buffer value may not be
the value used by the system. The effective PDVT provides an
indication that the PDV has been adjusted by the operating system.
Cfg Alarm The alarms that have alarm reporting enabled
Alarm Status The current alarm state (for example, stray, malformed, packet loss,
overrun, underrun, remote packet loss, remote fault, or remote RDI)
Internal Digital Phase Locked Loop (DPLL) Statistics
ACR DPLL
Statistics
frequency offset mean — the ACR frequency offset mean for
the previous 15 sets of 60-second intervals
frequency offset stddev — the ACR frequency offset
standard deviation for the previous 15 sets of 60-second intervals
phase error mean — the ACR input phase error mean and
output DCO mean for the previous 15 sets of 60-second intervals
phase error stddev — the ACR input phase error standard
deviation and output DCO standard deviation for the previous 15 sets
of 60-second intervals
Table 20: Show Port ACR Detail Output Fields (Continued)
Label Description
To Next Page
Loading...
