7705 SAR Interfaces
7705 SAR OS Interface Configuration Guide Page 57
*A:7705:Dut-C# show mda 1/3 detail
===============================================================================
MDA 1/3 detail
===============================================================================
Slot Mda Provisioned Equipped Admin Operational
Mda-type Mda-type State State
-------------------------------------------------------------------------------
1 3 a16-chds1 a16-chds1 up up
MDA Specific Data
Maximum port count : 16
Number of ports equipped : 16
Network ingress queue policy : default
Network ingress fabric policy : 1
Access ingress fabric policy : 1
Fabric Stats Enabled : FALSE
Capabilities : TDM, PPP, ATM, CEM
Min channel size : PDH DS0 Group
Max channel size : PDH DS1
Max number of channels : 256
Channels in use : 3
CEM MDA Specific Data
Clock Mode : adaptive
Hardware Data
Part number : Sim Part#
CLEI code : Sim CLEI
Serial number : mda-3
Manufacture date : 01012003
Manufacturing string : Sim MfgString mda-3
Manufacturing deviations : Sim MfgDeviation mda-3
Administrative state : up
Operational state : up
Software version : N/A
Time of last boot : N/A
Current alarm state : alarm active
Base MAC address : a4:58:01:03:00:01
===============================================================================
*A:7705:Dut-C#
DS0 channel groups and their parameters are configured in the DS1 or E1 context. For a
DS1 channel group, up to 24 timeslots can be assigned (numbered 1 to 24). For an E1
channel group, up to 31 timeslots can be assigned (numbered 1 to 32). For ATM, all
timeslots are auto-configured when a channel group gets created.
Note: Encapsulation type is configured at the DS1 or E1 level; however, a port can only
support one encapsulation type. When the first channel group is configured for encap-type,
all other channel groups on the port are automatically configured with that encap-type.
To Next Page
Loading...
