EasyManua.ls Logo

Alcatel-Lucent 7705 - Cabling

Alcatel-Lucent 7705
226 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7705 SAR Interfaces
7705 SAR OS Interface Configuration Guide Page 75
DS1 Commands
config
— [no] port {port-id}
— tdm
— [no] ds1
— [no] channel-group channel-group-id
— atm
— cell-format cell-format
— min-vp-vpi value
— crc {16 | 32}
— description description-string
—no description
— encap-type {atm | cem | ipcp | ppp-auto}
—no encap-type
— idle-cycle-flag {flags | ones}
—no idle-cycle-flag
— idle-payload-fill {all-ones | pattern pattern}
—no idle-payload-fill
— idle-signal-fill {all-ones | pattern pattern}
—no idle-signal-fill
— mode {access | network}
—no mode
— mtu mtu-bytes
—no mtu
— network
— queue-policy name
— [no] ppp
— keepalive time-interval [dropcount drop-count]
—no keepalive
— [no] scramble
— [no] shutdown
— timeslots timeslots
—no timeslots
— clock-source {adaptive-timed | loop-timed | node-timed}
— framing (DS1) {esf | sf | ds1-unframed}
— hold-time [up hold-time-up] [down hold-time-down]
—no hold-time
— loopback (DS1) {line | internal | fdl-ansi | fdl-bellcore | payload-ansi}
—no loopback (DS1)
— [no] remote-loop-respond (DS1)
— [no] report-alarm {ais | los | oof | rai | looped}
— [no] signal-mode {cas}
— [no] shutdown

Table of Contents