Alcatel-Lucent 7705 - Power; DC Power Requirements

Card, Adapter Card, and Port Command Reference
Page 76 7705 SAR OS Interface Configuration Guide
E1 Commands
config
— [no] port {port-id}
— tdm
— [no] e1
— [no] channel-group channel-group-id
— atm
— cell-format cell-format
— min-vp-vpi value
— crc {16 | 32}
— description description-string
—no description
— encap-type {atm | cem | ipcp | ppp-auto}
—no encap-type
— idle-cycle-flag {flags | ones}
—no idle-cycle-flag
— idle-payload-fill {all-ones | pattern pattern}
—no idle-payload-fill
— idle-signal-fill {all-ones | pattern pattern}
—no idle-signal-fill
— mode {access | network}
—no mode
— mtu mtu-bytes
—no mtu
— network
— queue-policy name
— [no] ppp
— keepalive time-interval [dropcount drop-count]
—no keepalive
— [no] scramble
— [no] shutdown
— timeslots timeslots
—no timeslots
— clock-source {adaptive-timed | loop-timed | node-timed}
— framing (E1) {no-crc-g704 | g704 | e1-unframed}
— loopback (E1) {line | internal}
— hold-time [up hold-time-up] [down hold-time-down]
—no hold-time
—no loopback (E1)
— [no] report-alarm {ais | los | oof | rai | looped}
— [no] signal-mode {cas}
— [no] shutdown