Alcatel-Lucent 7750 - Page 285

Command Reference
7750 SR Interface Configuration Guide Page 285
SONET-SDH Commands
SONET/SDH Commands
config
— [no] port {port-id}
— sonet-sdh
— clock-source {loop-timed | node-timed}
— framing {sonet | sdh}
— group sonet-sdh-index payload {tu3 | vt2 | vt15}
— hold-time hold-time {[up hold-time up] [down hold-time down]}
—no hold-time
— loopback {line | internal}
—no loopback
— [no] path [sonet-sdh-index]
— access
— egress
— vport name [create]
—no vport name
— agg-rate agg-rate
— [no] agg-rate
— rate {
max | rate}
—no rate
— [no] limit-unused-bandwidth
— [no] queue-frame-based-accounting
— description description-string
—no description
— [no]
egress-rate-modify
— host-match dest description-string [create]
—no host-match destination-string
— port-scheduler-policy port-scheduler-policy-
name
—no port-scheduler-policy
SONET Path ATM Commands
— atm
— cell-format cell-format
— ilmi [vpi/vci]
—no ilmi
— egress
— traffic-desc traffic-desc-profile-id
—no traffic-desc
— ingress
— traffic-desc traffic-desc-profile-id
—no traffic-desc
— keep-alive [poll-frequency seconds] [poll-count
value] [test-frequency seconds]
—no keep-alive
— protocol protocol-type
—no protocol
— [no] shutdown
— min-vp-vpi value
— cisco-hdlc
— down-count down-count
—no down-count
— keepalive time-interval
—no keepalive
— up-count up-count
—no up-count