2 Using your telephone
2.1 Change the default password
To access all your phone's features you need to replace the default password with a new password.
Use one of the following:
o Press the User services key.
o Press your information area in the top left corner of the screen User Information
Login
Enter the default password (151515).
Enter the new password.
Your password has 6 digits.
A weak personal code with 6 identical digits (000000, 111111, etc.) or a simple sequence of 6
digits (012345, 123456, etc.) will be rejected by the system.
Confirm the new password.
Ok
After a system upgrade, the password may still have only 4 digits. For security reasons, we
recommend you use a password with 6 digits. Contact your installer for more information.
2.2 Making a call
Use one of the following:
o Dial directly the number for your call.
o Lift the receiver Enter the destination number.
o Press the on-hook/off-hook key of the Bluetooth® device ( Bluetooth® Wireless
handset) Dial the destination number.
o Dialer
o Hands free Dial the destination number.
o Programmed line key.
o Search by name (you can also access the search by name feature via the
alphapad).
Call
To make an external call, dial the outside line access code before dialing your contact number. The
default outside-line access code is usually 0. However, please check this code with your installer.
The picture of your correspondent can appear on the phone only if a picture was initially copied in the
set memory and associated to your contact (See: Define a contact).
To Next Page
Loading...
Need help?
General
