5.8 Programing a direct shortcut for a contact.
In standard mode, you can program a direct call shortcut on your homepage.
Access programming and configuration of shortcut keys on the homepage
Select the application.
Settings
Application Homepage
Features keys are displayed on the bottom of the homepage. These keys are meant to manage
shortcut key programming, key modification, deletion, moving and reseting of the homepage display.
Add a shortcut key
Add
Select the contact to associate with the shortcut via your list of contacts.
Once you have found the contact, the caller or entered the number :
Add shortcut
The key you just added appears greyed-out.
Back
To end the programming.
The key you just added is displayed on the homepage.
If keys are programmed via the list of contacts :
- A short press will start the call.
- A long press will open the contact file.
To Next Page
Loading...
Need help?
General
