Alcatel-Lucent OmniTouch 8082 My IC - Uninstall a Bluetooth Device (Unpairing); Hearing Aid Kit; Set an Alarm

45
After pairing the Bluetooth® accessory, you must define the accessory type in the audio settings.
 Select the application.
Settings
 Device Audio Accessory type BT Ok
 Bluetooth® accessory Headset Ok
Error messages
 The handset displays an error message indicating that the pairing is unsuccessful Check the
status of your Bluetooth® handset or the PIN code.
8.16 Uninstall a Bluetooth® device (unpairing)
 Select the application.
Settings
 Device Bluetooth®
 Select the Bluetooth® device to unpair.
 Delete
The Bluetooth® device is uninstalled (unpaired).
8.17 Hearing aid kit
If you are using your phone with a hearing device, you must install and activate the hearing aid
device (HAC) to avoid hearing discomfort.
 Select the application.
Settings
 Device Audio Hearing aid
 Enable the feature : YES
The hearing aid kit is activated.
8.18 Set an alarm
 Alarm
 Hour
Enter the alarm time.
 Alarm sound
Select the melody of your choice.
 Volume
Adjust the alarm volume.
 Alarm status
Enable the feature.
The associated LED is on: the feature is enabled.
The icon is displayed (connectivity information zone).
When the alarm bell rings, you can choose to repeat the alarm or turn it off.