Alcatel-Lucent OmniTouch 8082 My IC - Ring Tones; Progressive Ringing; Adjusting the Ringer Volume; Adjust Ringer Volume While a Call Arrives

42
8.7 Ring tones
 Select the application.
Settings
 Device Audio Beeps before ringing
o One beep : One beep before ringing.
o Two beep : Two beeps before ringing.
o Three beep : Three beeps before ringing.
o No beep : Ring without beep.
 Validate your choice.
Ok
8.8 Progressive ringing
 Select the application.
Settings
 Settings Device Audio Ascending ringing
 Enable or disable the feature.
8.9 Adjusting the ringer volume
 Select the application.
Settings
 Device Audio Ringing volume
 Adjusting the ringer volume ( 0 to 9).
8.10 Adjust ringer volume while a call arrives
 The telephone rings when a call is received.
 Decrease volume.
 Increase volume.
8.11 Adjust the loudspeaker and the handset volume
 During a call, to adjust the volume level of the loudspeaker or receiver:.
 Decrease volume.
 Increase volume.
8.12 Activate/deactivate tactile feedback
When you press one of your phone keys, a vibration confirms that the action has been taken into
account by the system.
To activate or deactivate key vibration:
 Select the application.
Settings
 Device Phone configuration Haptic feedback
 Enable or disable the feature.