※ Safety Notice
In order to use the machine correctly, the Safety Precaution has described the protection
precautions to prevent the harms and losses that may be caused to the bodies and properties
of you and others. Please read this manual carefully before using and keep it properly for
your reference in the future.
※ Warning Signs
Please have fully understanding of the signs and figures below before reading the manual.
If this sign is ignored and the machine is thus used incorrectly, death or
serious injury accidents may be caused to personnel.
If this sign is ignored and the machine is thus used incorrectly, death or
serious injury accidents may be caused to personnel.
If this sign is ignored and the machine is thus used incorrectly, injury
accidents may be caused to personnel and the machine may be damaged.
※ Conditions For Use
As this device is not provided in an explosion-proof, waterproof or dustproof
type, please avoid use in the following circumstances.Failure to comply with
this warning may cause faults or damages.
(1) Circumstances with combustible gas, pyrophoric liquid, etc.;
(2) Circumstances with flying or dispersing conductive metal chips due to matel processing or
cutting
(3) Circumstances with acid, alkali or other corrosive gas.
(4) Circumstances with spray os cutting fluid, grinding fluid, etc.;
(5) Circumstances near electrical noise sources like large-sized converters, devices with large
output of g higher harmonics, large conductors, welding machine, etc.;
(6) Circumstances where the operating temperature is beyond the range of 0 ~ 40 ℃;
(7) Circumstances with humidity more than 90%RH;
(8) Circumstances with occurrence of condensation.
To Next Page
Loading...
Need help?
General
