ALIBI ALI-NVR5032P - Setting Sensor Alarms

45
ALI-NVR5000P Embedded NVR User Manual
To congure exception alarms:
1. Open the Exception menu. Go to Menu | Conguration | Exceptions
2. On the Exception Type line, open the drop down list and select the exception condition you want to congure. If you select
All, all exception conditions will be treated the way you congure the response.
3. Select the response options you want to use.
4. Click Apply to save your settings.
5. Repeat these steps for other Exception Types you want to congure.
2.11 Setting sensor alarms
Use this subsection to congure how the NVR reacts to sensor alarms wired to the RS-485 ALARM IN/OUT terminals on the back
panel. Alarm inputs can be normally open (N.O.), or normally closed (N.C.).
1. Open the Alarm menu. Go to Menu | Conguration | Alarm
SECTION 2: INSTALLING THE SYSTEM