34
Navigating and Customizing Your Flow Controller
SAVE
CANCEL
GAS
OPTNS
ADD GAS
COMPOSER Mix: MyGas1
71.35%
C2H6 Ethane
C3H8 Propane
N2 Nitrogen
EDIT
NAME
Total
CH4 Methane
94.60%
19.25%
1.00%
3.00%
DONE
DELETE
GAS
EDIT %DOWN
71.35%
C2H6 Ethane
C3H8 Propane
N2 Nitrogen
UP
CH4 Methane
19.25%
1.00%
3.00%
19.25
Percent ofN2
SET
CLEAR
BACK/
CANCEL
SELECT
DIGIT
DOWNUP
>
SELECT
MIXTUREMAIN
CREATE
SIMILAR
CREATE
NEW
COMPOSER USER MIX
MyGas1
HAS BEEN SAVED
SET
CHANGE
CASE
BACK/
CANCEL
NEXT
LETTER
DOWNUP
COMPOSER Mix name:
--- --
MyGa
>
Adding a new mixed gas composition to COMPOSER
Generate and store a new COMPOSER mix in 3 easy steps.
MAIN Exits to the Main Display and keeps
your existing gas selection. SELECT MIXTURE
also activates the new COMPOSER mix.
CREATE NEW/SIMILAR Restarts at Step 1.
After saving a name, CREATE SIMILAR
duplicates the mix you just saved.
Note: CREATE SIMILAR is not accessible
after leaving this screen.
1 Name
the mix.
CHANGE CASE
Toggles upper/
lower case.
SET Accepts
the name.
SAVE Adds the new
mix to COMPOSER.
CANCEL Exits to the
COMPOSER Menu.
BACK/CANCEL Exits
to the COMPOSER
Menu.
3 Save
the mix.
2 Dene
the mix.
Note: You cannot save your mix
until the total is 100%. Saved gas
compositions cannot be changed.
ADD GAS Enters Gas Select
listing to choose a gas,
then asks you to set its
composition percentage.
GAS OPTNS Edits
the non-nal gas
mix composition.
You can delete
a gas or change
its composition
percentage.
EDIT NAME Returns
to Step 1.
To Next Page
Loading...
Need help?
General