Professional
FM Transceiver
26
Switch between VFO and Frequency+Channel Mode
Press
【
D
】
key to switch between frequency mode (VFO) and Frequency + Channel mode or
Channel+Name Tag mode.
NOTE: When the channel hasn’t been preprogrammed, this operation is unavailable.
BASIC OPERATIONS
Side Key
【
PF2
】
Function Instruction
Default setting: Monitor function
1. Monitor function: In stand-by state, press and hold this key to open the squelch and monitor the
channel. Release the key to Exit.
2. Turning on with this key pressed and hold it for 3 seconds to enter to the parameter.
To Next Page
Loading...
