Alinco DJ-A40 - Resume Factory Default (RESET)

Professional
FM Transceiver
54
Resume Factory Default (RESET)
Use this feature to reset settings and go back to the default state or in case the radio malfunctions
and key operations may become faulty.
1.Press and hold
【
PF2
】
key while turning on the radio, and keep pressing
【
PF2
】
key for 3 seconds
to enter into the Set Mode operations.
2.Press
【
B
】
/
【
C
】
key to choose the Menu 18 and display “
”.
3.Press
【
A
】
key then press
【
B
】
key or
【
C
】
key to choose the reset mode.
FACT?:
Resume Factory default. Frequency, signaling tones and function
settings will return to the factory default.
INIT?:
Resume Set mode setting parameters to default. Frequency, signaling
tones and function settings remain unchanged.
4. Press
【
#
】
key to confirm and perform the reset.
SET MODE OPERATIONS
NOTE:
Once the reset is performed, previous programming data are gone and can’t recall. to manually record
major parameters such as frequency and signaling settings used in your group to manually restore the
data after reset.
Once the reset is performed, the data will be all erased and can't be resumed.
The reset is not available to Dealer-programmed units. Please consult the dealer for technical
assistances.