10 Rockwell Automation Publication 1732E-UM001A-EN-P - December 2019
Chapter 2 Configure and Startup
2. Click Next.
3. Select “Register an EDS file(s)” and click Next.
4. Click Browse and select the EDS file that you have downloaded.
5. Click Next to begin the EDS file registration.
6. Verify that the EDS Wizard successfully completed the registration.
7. Click Finish.
Read the MAC Address
Each module has a unique media access control address (MAC address) that is
assigned and cannot be changed. The MAC address is located on the front of the
module.