Rockwell Automation Publication 1732E-UM001A-EN-P - December 2019 17
Configure and Startup Chapter 2
General Page
The General page appears first when you create or add a new module to your
Logix Designer project.
Figure 2 - Example of General Page
Table 9 - General Parameters
Parameter Definition
Type Type of module
Vendor Rockwell Automation/Allen-Bradley
Name Enter a name for the module
Description Enter an optional description for the module
Module Definition Displays the module definition. For more information on how to configure
the module definition, see Module Definition Dialog
on page 18.
Ethernet Address Set the Ethernet address for the module
To Next Page
Loading...
Need help?
General
