Rockwell Automation Publication 1732E-UM001A-EN-P - December 2019 5
Preface
This manual describes how to use the ArmorBlock® I/O 16-channel configurable
digital module.
Make sure that you are familiar with the following:
• Use of a controller in a Logix 5000™ control system
• Studio 5000 Logix Designer® environment
Who Should Use This
Manual
This manual is intended for trained and qualified personnel who are responsible
for mounting, installation, commissioning, operation, maintenance, and
disassembly of the ArmorBlock I/O 16-channel configurable digital module.
Purpose of This Manual
This manual provides information and describes the procedures that are used to
install, wire, troubleshoot, and operate the ArmorBlock I/O 16-channel
configurable digital module.
Additional Resources
These resources contain information about related products from
Rockwell Automation.
You can view or download publications at
https://www.rockwellautomation.com/literature/
. For publications specific to
your module, search the catalog number of the module. To order paper copies of
technical documentation, contact your local Allen-Bradley distributor or
Rockwell Automation sales representative.
IMPORTANT You must use the RSLogix 5000® and Studio 5000®, version 20.00.00 or later, to
configure the ArmorBlock I/O module.
Resource Description
ArmorBlock I/O 16-Channel Configurable Digital Module
Installation Instructions, publication 1732E-IN008
Describes how to install and wire the ArmorBlock I/O
module.
ArmorBlock I/O Selection Guide, publication 1732-SG001
Provides specifications, wiring diagrams, and module
block diagrams for ArmorBlock I/O modules.
Industrial Automation Wiring and Grounding Guidelines,
publication 1770-4.1
Provides general guidelines for installing a
Rockwell Automation industrial system
Product Certifications website,
https://www.rockwellautomation.com/
rockwellautomation/certification/overview.page
Provides declarations of conformity, certificates, and other
certification details.
To Next Page
Loading...
