3–10 Configuring Through DeviceNet Manager Software
Publication
1756–6.5.15 – July 1998
You see a screen similar to this one.
Select the file you wish to load and choose OK.
2. Click on the device you wish to view so it is highlighted.
3. Click on the Active in ScanList check box to include the device
in the scan cycle.
4. Click on the appropriate check boxes in the Electronic Key field
to record information about the device that you want to store.
(This may be useful in preventing someone from entering the
wrong type of device into the network if a device has to be
replaced or changed.)
These items are a list of criteria that you can customize to fit your
application’s specific needs. An “X” in an item’s box indicates
that it is an active keying parameter. These selections are
hierarchical in descending order. For example, you cannot
choose Vendor without Device Type.
5. To edit the Scan List Editor display, choose Display Filters.
You see this screen.
6. Customize the display by clicking on the box next to your
choice(s).
To Next Page
Loading...
