Allen-Bradley DeviceNet 1756-DNB - Adding Devices to Scan List

3–11Configuring Through DeviceNet Manager Software
Publication 1756–6.5.15 – July 1998
Important: Certain display-property combinations can result
in a blank Scan List Editor screen.
7. Choose OK.
You return to the Scan List Editor screen.
8. Save your data:
To In this Field Choose
Save data to your communication module’s
non-volatile memory
1
Save to DNB
Save data to a file in your pc Save to File
1
This induces a flash-memory update; the communication module must be in idle mode.
Adding Devices to the Scan List from the Scan List Editor Screen
When adding devices to the scan list, the source from which devices
are taken depends upon how you entered the communication module
configuration screens – through project view or Network Who.
If you entered the
configuration screens through
Then devices are added from
Project view The project
Network Who The who
Follow these directions to add devices to your scan list from the scan
list editor.
1. Choose the appropriate button in the Add Devices From group
(Proj or W
ho).
You see the Add Devices to Scan List screen.
Allen-Bradley Drives