Equipment Phase Instructions
444 Rockwell Automation Publication 1756-RM006K-EN-P - November 2018
device has faulted. The PFL instruction sets the failure code only to a value greater
than its current value.
Available Languages
Ladder Diagram
Function Block
This instruction is not available in function block.
Structured Text
PFL (Failure_Code);
Operands
Ladder Diagram
Operand Type Format Description
Failure_Code DINT immediate
tag
Value to set the failure code for the equipment phase.
If a negative failure code given, it evaluates as 0.
To Next Page
Loading...
