Publication 2711P-UM001B-EN-P
Transferring files and Upgrading Firmware 7-3
4. The following dialog shows the connected terminal and the
firmware version currently loaded on the terminal. From the
Upgrade firmware version list, select the firmware version to
use for the upgrade and press Next>.
5. A dialog opens listing all KEPServer drivers that can be included
with the firmware. Check the boxes next to the driver names
that you want to include with the firmware and press Next>.
TIP
If no firmware versions are listed, change the
firmware source folder to the folder containing
the Firmware Upgrade Package (.FUP) files.
TIP
If the selected .FUP file does not support the
KEPServer drivers, this dialog will not be
displayed.
AB Drives
To Next Page
Loading...
Need help?
General
