ALLIANCE 030 Series Installation

North America Models Australia Models CE Models
Maximum 10.5 in. w.c. 2.61 kPa Refer to Table
14
Recommend-
ed
6.5 in. w.c 1.62 kPa
Minimum 5 in. w.c. 1.13 kPa
An in-line pressure regulator may be required if the line pressure
exceeds 10.5 water column inches [26.1 mbar, 2.61 kPa] with all
gas appliances running.
PROPANE/LIQUID PETROLEUM GAS (L.P.G.) supply pres-
sures with all gas appliances running (tumble dryers, water heat-
ers, space heaters, furnace, etc.):
North America Models Australia Models CE Models
Maximum 13 in. w.c. 3.23 kPa Refer to Table
14
Recommend-
ed
11 in. w.c. 2.74 kPa
Minimum 10 in. w.c. 2.49 kPa
Gas Requirements
©
Published by permission of the copyright owner -
DO NOT COPY or TRANSMIT
47 Part No. 70686701ENR4

ALLIANCE 030 Series Specifications

General

Brand	ALLIANCE
Model	030 Series
Category	Dryer
Language	English