GVRP Commands
Page 122
Syntax
show gvrp configuration [ethernet interface | port-channel port-channel-number]
Parameters
•
interface — A valid Ethernet port. (Full syntax: unit/port)
• port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays GVRP configuration information:
show gvrp statistics
The show gvrp statistics User EXEC mode command displays GVRP statistics.
Console>
show gvrp configuration
GVRP Feature is currently enabled on the device.
Maximum VLANs: 255
Timers (milliseconds)
Port(s) Status Registration Dynamic VLAN
Creation
Join Leave Leave All
------ ------- ------------ ----------- ---- ----- ---------
1/e1 Disabled Normal Enabled 200 600 10000
1/e2 Disabled Normal Enabled 200 600 10000
1/e3 Disabled Normal Enabled 200 600 10000
1/e4 Disabled Normal Enabled 200 600 10000
1/e5 Disabled Normal Enabled 200 600 10000
1/e6 Disabled Normal Enabled 200 600 10000
1/e7 Disabled Normal Enabled 200 600 10000
1/e8 Disabled Normal Enabled 200 600 10000
1/e9 Disabled Normal Enabled 200 600 10000
Console>
To Next Page
Loading...
