Port Monitor Commands
Page 208
show ports monitor
The show ports monitor User EXEC mode command displays the port monitoring status.
Syntax
show ports monitor
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example shows how the port monitoring status is displayed.
Console
show ports monitor
Source Port Destination Port Type Status
----------- ---------------- ----- -------
1/e1 1/e8 RX,TX Active
1/e2 1/e8 RX,TX Active
1/e18 1/e8 RX Active
To Next Page
Loading...
