RMON Commands
Page 238
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the following alarm conditions:
• Alarm index — 1000
• Variable identifier — ati
• Sample interval — 360000 seconds
• Rising threshold — 1000000
• Falling threshold — 1000000
• Rising threshold event index — 10
• Falling threshold event index — 20
show rmon alarm-table
The show rmon alarm-table User EXEC mode command displays the alarms table.
Syntax
show rmon alarm-table
Parameters
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the alarms table.
console(config)#
rmon alarm
1000 ati 360000 1000000 1000000 10 20
console>
show rmon alarm-table
Index OID Owner
----- ---------------------- -------
To Next Page
Loading...
