Allied Telesis AT-8000S - Show Ip Https

Page 371
Not approved by Document Control. For review only.
Allied Telesis
AT-8000S-S94-3.0 Command Line Interface User’s Guide
Parameters
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the HTTP server configuration.
show ip https
The show ip https Privileged EXEC mode command displays the HTTPS server configuration.
Syntax
show ip https
Parameters
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the HTTP server configuration.
console# show ip http
HTTP server enabled. Port: 80
console#
show ip https
HTTPS server enabled. Port: 443