Allied Telesis AT-8000S User Manual

Configuration and Image File Commands
Page 90
Syntax
show running-config
Parameters
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the contents of the running configuration file.
show startup-config
The show startup-config Privileged EXEC mode command displays the contents of the startup configuration file.
Syntax
show startup-config
Parameters
This command has no arguments or keywords.
console# show running-config
software version 1.1
hostname device
interface ethernet 1/e1
ip address 176.242.100.100 255.255.255.0
duplex full
speed 1000
interface ethernet 1/e2
ip address 176.243.100.100 255.255.255.0
duplex full
speed 1000

Allied Telesis AT-8000S Specifications

General

Category	Network Management Software
Compatible Devices	Allied Telesis switches and routers
Functionality	Network monitoring
User Interface	Graphical User Interface (GUI)
Protocols Supported	SNMP, Telnet, SSH