Allied Telesis AT-8000S - dot1 x guest-vlan enable

Page 389
Not approved by Document Control. For review only.
Allied Telesis
AT-8000S-S94-3.0 Command Line Interface User’s Guide
Syntax
show dot1x advanced interface
Parameters
•
interface — Ethernet interface.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
User Guidelines
There are no user guidelines for this command.
Example
The following example displays 802.1X advanced features for the switch.
console# show dot1x advanced
Guest VLAN: 3978
Unauthenticated VLANs: 91,92
Interface Multiple Hosts Guest VLAN MAC Authentication
--------- -------------- ---------- ----------
1/1 Disabled Enabled MAC-and-802.1X
1/2 Enabled Disabled Disabled
console#
show dot1x advanced ethernet 1/1
Guest VLAN: 2
Unauthenticated VLANs: 91,92
Interface Multiple Hosts Guest VLAN MAC Authentication
--------- -------------- ---------- ----------
1/1 Disabled Enabled MAC-and-802.1X
1/2 Enabled Disabled Disabled
Single host parameters