9
Part names
6. MIC terminal (XLR or 1/4”/6.35 mm, TRS) (page 21)
7.
Kensington security slot
Connect a cable lock.
8. AC IN (page 21)
Connect to a power outlet with the supplied power cord.
9.
MASTER INSERT/SEND FX EXTERNAL SEND terminals (1/4”/6.35 mm, TS)
(page 24)
Connect to input terminals on external effects units.
• If you connect a device to the [L (MONO)] terminal only, mono sound is output.
10.
REC OUT terminals (RCA) (page 22)
Connect a device for recording. You can use them as output terminals for a power
amplifier, etc.
11. MASTER terminals (balanced XLR) (page 22)
Connect to analog input terminals on a power amplifier, etc.
• Use the terminals for balanced output only.
• Do not connect a power cord from another product to the terminals.
• Do not connect to a terminal that can supply phantom power.
12.
BOOTH terminals (1/4”/6.35 mm, TRS) (page 22)
Connect a booth monitor.
• Use the terminals for balanced output only.
• If you connect equipment to the [L (MONO)] terminal only, mono sound is output.
13.
DIGITAL IN terminals (RCA) (page 21)
Connect to a digital coaxial output terminal on a multi player, etc.
• Sound may break when the signal’s sampling frequency changes.
14.
USB port (page 22)
Connect a PC/Mac.
To Next Page
Loading...