Alternate Mode malletKAT - Page 78

malletKAT User Manual (ver.07-17-18)
C = Hang Mode, Melody Chord 1, Melody Chord 2, Melody Chord 3 Modes
D = Split Mode
E = Double, VEL Shift, ALT Mode
F = Monophonic Mode , RTC, RTC+Velocity (Layer two PTW, CTLA,CTLB, CTLC)
G = Polyphonic Mode
A = Transpose Mode
B = MIDI Channel
C# = 6 number
D# = 7 number
F# = 8 number
G# = 9 number
A# = 0 number
The following functions are all User Setup Layer Modes(https://alternatemode.com/online-docs/malletkat/#layer-
mode)
and are fully described in that section:
HANG MODE =C
MELODY CHORD MODE =C (2 -4 times)
SPLIT MODE =D
DOUBLE MODE =E
VELOCITY SHIFT MODE=E (twice)
ALTERNATE MODE =E (three times)
MONOPHONIC MODE = F
POLYPHONIC MODE = G
The following functions require additional settings, and are described in detail in the Programming
78 / 109