malletKAT User Manual (ver.07-17-18)
Guide(https://alternatemode.com/online-docs/malletkat/#full-malletkat-programming-guide)
section:
RTC REAL TIME CONTROL MODE =F (twice)
RTC + VELOCITY =F (three times)
PITCH WHEEL MODE = F (four times)
VIRTUAL CONTROL WHEEL = F (5 to 7 times)
TRANSPOSE MODE = A
You can change the pitch range of either controller -12 to +12 semitones. This changes the pitch in half steps.
CHANNEL = B
This sets the MIDI Channel that the Controller will broadcast to the external Sound Source
LOWER OCTAVE
malletKAT Express
Since the Express is only two octaves, the lowest (3rd) octave function pads require the Edit Footswitch and Sustain
1 pedal at the same time (See Section 4.1.1(https://alternatemode.com/online-docs/malletkat/#malletkat-express-accessing-
editing-functions)
)
79 / 109
To Next Page
Loading...
