Alto-Shaam AR-7T - Page 31

MN-39404 • Rev 0 • 05/18 • AR-7T Series Electric Rotisserie Manual 31
Operation
Control Panel Identification
Calibrate screen
Restore factory defaults
Current page
Previous screen
Save changes to settings
Return to previous screen
Settings screen 2
How to calibrate the screen
Touch the calibrate screen icon.
A question mark will appear on the screen.
Touch the check mark icon.
Touch the plus sign icon as it appears in each
corner of the screen.
When all four corners have been acknowledged, the Start-Up
screen will appear briefly, then the display will return to the
Home screen.
How to restore factory defaults
NOTICE
: All saved recipes will be deleted.
Touch the restore factory defaultsicon.
A question mark will appear on the screen.
Touch the check mark icon.
The screen will go blank for a moment. The Start-Up screen
will appear briefly, then the display will return to the Home
screen.
How to select the cleaning method
Touch to clean using tablet cleaner.
or
Touch to clean using liquid cleaner.
Touch the check mark icon.