EasyManua.ls Logo

Alto-Shaam AR-7T

Alto-Shaam AR-7T
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32 MN-39404 • Rev 0 • 05/18 • AR-7T Series Electric Rotisserie Manual
Operation
Control Panel Identification
M1K40 K41 K42
Y5M2 Y3 Y4
Y8Y7
ID#: A:51:EF:00:00:11
IB: 0.85
CB: .78
PCB: 78ºF
N6: 119ºF
N8: 78ºF
Steps: 0 850
SW1
N7
M1_HL
Vent Valve*
Return to previous screen
Outputs
Service Mode Screen
System Information
System Information
The Servi
ce Mode screen displays the following system
information:
ID#:
The serial number of the board combination.
IB:
The so ware version number of the interface board.
CB:
The so ware version number of the control board.
Active Recipe:
The recipe currently running.
PCB:
The temperature of the control board (Printed Circuit
Board).
N6:
The temperature reading at the N6 cavity temperature
probe.
N7:
The temperature reading at the N8 water heater
temperature probe.
SW1:
The state of switch 1. An asterisk (*) indicates that the
door is open.
N7:
The state of the safety switch. An asterisk (*) indicates that
the switch is open.
M1_HL:
The state of the motor 1 high limit safety switch.
Anasterisk (*) indicates that the switch is open.
Vent Valve:
The state of the browning vent valve.
An asterisk (*) indicates that the switch is open.
Outputs
NOTICE:
Must be done by qualified personnel only.
Each of the squares is an output that is available on the board
for service personnel to test to ensure unit operation.

Table of Contents

Other manuals for Alto-Shaam AR-7T

Related product manuals