EasyManuals Logo

Alto-Shaam CT PROFORMANCE CTP6-10E User Manual

Alto-Shaam CT PROFORMANCE CTP6-10E
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
MN-35947
Rev 15
01/18
Combitherm® CT PROformance™ and CT Classic Series Installation Manual
11
Pre-Installation Checklist
Location Information
Location Name: __________________________________________________________
Location Street Address: __________________________________________________________
Location City: __________________________________________________________
Location State: _____________________ Zip: ___________________________
Site Contact Name: ____________________________________________________________
Site Contact Phone No.: ____________________________________________________________
Site Contact Email: ____________________________________________________________
Number of combis to be installed
Model number(s) of combis to be installed
Serial number of combi’s to be installed
Clearance
Measure door/entry way clearance (smallest dimension)
PASS FAIL
Measure path clearance (smallest dimension)
PASS FAIL
Elevator opening, if applicable (smallest dimension)
PASS FAIL
Elevator interior dimensions, if applicable (HxWxD)
PASS FAIL
Appliance clearance Right side
PASS FAIL
Left side
PASS FAIL
Rear
PASS FAIL
Top
PASS FAIL
Based on the appliances designated spot in the kitchen,
would the appliance be accessible for service?
YES NO
If NO, comment on the issue:
Water Supply
Is there at least one cold water supply line within
3 feet of where each appliance will be installed?
PASS
FAIL
:
DESCRIBE ISSUE
Do water supply line(s) have shut-off(s) exclusively for each
oven?
PASS
FAIL
:
DESCRIBE ISSUE
Do water supply line(s) provide a total two hookups per
appliance, terminated with female NPT fi ttings?
PASS
FAIL
:
DESCRIBE ISSUE
Is the dynamic water pressure from the cold water supply
line a minimum of 30 psi (200 kPa) for each appliance?
PASS FAIL UNKNOWN
Is the static water pressure from the cold water supply line
less than 90 psi (600 kPa) for each appliance?
PASS FAIL UNKNOWN
Is the minimum water fl ow rate for the treated water line
0.26 gpm (1 L/min) for 6-10, 10-10 and 7-20 models,
0.53 gpm (2 L/min) for 10-20 models, and
0.80 gpm (3 L/min) for 20-10 and 20-20 models.?
PASS FAIL UNKNOWN
Is the minimum water fl ow rate for the untreated water line
2.6 gpm (10 L/min)?
PASS FAIL UNKNOWN
Is water treatment (RO blend system, fi lter, etc.) being used?
YES NO UNKNOWN
If YES - Note the system here:
BRAND NAME MODEL
Can the site contact provide evidence that a documented
water analysis has been performed?
YES NO
Pre-Installation Company Information
Company Name: __________________________________________________________
Mailing Address: __________________________________________________________
City: __________________________________________________________
State: _____________________ Zip: ____________________________
Technician Name: ____________________________________________________________
Technician Phone No.: ____________________________________________________________
Contact Email: ____________________________________________________________
Date of Site Survey: ____________________________________________________________
Pre-Installation Checklist

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Alto-Shaam CT PROFORMANCE CTP6-10E and is the answer not in the manual?

Alto-Shaam CT PROFORMANCE CTP6-10E Specifications

General IconGeneral
BrandAlto-Shaam
ModelCT PROFORMANCE CTP6-10E
CategoryOven
LanguageEnglish

Related product manuals