Alto-Shaam CT PROFORMANCE CTP6-10E

68
•
MN-35947
•
Rev 15
•
01/18
•
Combitherm® CT PROformance™ and CT Classic Series Installation Manual
Inspection Checklist
Unit Information
Business Name: ________________________________________
Model Number: ________________________________________
Serial Number: _________________________________
Weekly Inspection Start Date: _________________________________
Weekly Inspection Checklist
Inspect - Oven cavity lamp
Inspect - Oven cavity for signs of grease/carbon buildup
Inspect - Loosen thumb screws to inspect behind the fan panel inside the oven cavity for signs of grease/carbon buildup
Inspect - Loosen thumb screws to inspect behind the fan panel inside the oven cavity for signs of scale buildup
Inspect - The heat exchanger for any signs of major deformation. If yes, immediately remove from service and take corrective
action steps.
Inspect - The heat exchanger for any loose/disconnected pipes or flanges. If yes, immediately remove from service and take
corrective action steps.
Inspect - Convection elements for signs of cracking, deformation, or damage
Clean ventless hood grease filters
Employee initials
Component Malfunction and Replacement
List details of the failure(s) next to the day they occurred. Leave blank if components are working properly.
Week 1
Week 2
Week 3
Week 4
G
G
E
EG Gas units only Electric units only
Weekly Inspection