70
•
MN-35947
•
Rev 15
•
01/18
•
Combitherm® CT PROformance™ and CT Classic Series Installation Manual
Inspection Checklist
Unit Information
Business Name: _______________________________________
Model Number: _______________________________________
Serial Number: ______________________________
12-Month Inspection Start Date: ______________________________
12-Month Inspection Checklist
Replace - Steam bypass hose
Inspect - Cleaning pump hose
Inspect/Test - Proper draining of the oven cavity
Inspect - All drain lines for leaks or clogs
Inspect - All solenoid hoses (both ends)
Inspect - Upper browning valve hose
Inspect - Low pressure relief valve & hose
E Inspect - Convection element seal (from the electrical compartment)
G Inspect - Gas heat exchanger seal (from the electrical compartment)
Inspect - N6 oven temperature probe seal
EB Descale the steam generator
EB Remove & Inspect - Steam generator elements
Inspect - Hand shower hose
Inspect - Hand shower handle
Inspect - Product probe
Inspect - Water injection tube
Inspect - Oven cavity for any signs of scale buildup
Inspect - Oven cavity lamp
Inspect - Oven cavity for signs of grease/carbon buildup
Inspect - Behind the fan panel inside the oven cavity for signs of grease/carbon buildup
Inspect - Behind the fan panel inside the oven cavity for signs of scale buildup
EB Electric boiler units only EG Gas units only Electric units only
Yearly Inspection
To Next Page
Loading...
