34
GFCI Protection
When properly installed, the GFCI circuit breaker provides reliable overload and short circuit
protection PLUS protection from ground faults that might result from contact with a “HOT” load
wire and ground.
IMPORTANT NOTE: The GFCI circuit breaker will NOT reduce shock hazard if contact is made
between a “HOT” load wire and a neutral wire or 2 “HOT” load wires.
Each GFCI circuit breaker is calibrated to trip with a ground current of 5 milliamperes or more.
Since most people can feel as little as 2 milliamperes, a distinct shock may be felt if the need for
protection exists. However, the shock should be of such short duration that the effects would be
reduced to less than the normally dangerous level. However, people with acute heart problems
or other conditions that can make a person particularly susceptible to electric shock may still be
seriously injured.
While the GFCI circuit breaker affords a high degree of protection, there is no substitute for the
knowledge that electricity can be dangerous when carelessly handled or used without reasonable
caution.
WARNING: THE GFCI CIRCUIT BREAKER PROVIDES PROTECTION ONLY TO THE CIRCUIT TO
WHICH IT IS CONNECTED. IT DOES NOT PROVIDE PROTECTION TO ANY OTHER CIRCUIT.
GFCI s are proven lifesavers, however, consumers need to take a few minutes each month to do
this simple test. By taking action on GFCI equipped outlets, you can help protect your family from
the risk of electric shock.
• Perform this test on the GFI Breaker each month and record the date on the chart.
• Firmly press “Test” button.
• Firmly press the “Reset” button to restore power.
IMPORTANT: if pilot light stays on when “test” button is depressed or does not turn on
when “reset” button is depressed, the GFCI breaker protection is not complete. if this
happens, replace the GFCI outlet.
To Next Page
Loading...