EasyManua.ls Logo

Alto F2114 - Microwave Oven Operation; Mounting Bicycles on Rack

Alto F2114
126 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
67
WARNING: NEVER USE PROPANE STOVE IF CURTAINS ARE NOT TIED UP OR RETRACTED.
ALWAYS START ROOF VENT AND OPEN A WINDOW OR THE DOOR.
WARNING: NEVER USE STOVE AS A SPACE HEATER.
Microwave Oven (Optional)
Instructions pertaining to the microwave oven are included in the documentation given to
you at the dealership. Please read and follow all provided care, maintenance, and safety
information. Store instructions in a safe place for future reference. Pass the documentation
on to any subsequent users of the microwave oven.
IMPORTANT: It is strongly recommended that you read the supplied manufacturer’s
instructions when purchasing trailer.
Only federally certified technicians are permitted to service microwave ovens. For this reason,
the only service instructions contained in this manual are for removal of the complete oven. If
you have a microwave oven problem please contact the appropriate manufacturer, an authorized
ALTO dealer, or the Factory Customer Service Department.
To use microwave, set “OUTLET 1/ MICROWAVE” switch on MICROWAVE (photo H-2). It is
located:
R SERIES: at the end of the counter
F and A SERIES: above the counter near the entrance.
R SERIES: To remove the microwave from the ALTO
1. Unplug it from the outlet under the counter and remove the extension.
2. Remove the top of the cabinet by unscrewing the two screws found on each side near the
back, and by loosening the front by tapping upwards. Front of the cabinet is not screwed
in place, but is held by two plastic wedges that are slid tightly into the vertical aluminum
extrusions.
3. Under the microwave, unscrew the 4 screws that hold it in place.
4. To reinstall the microwave, reverse operations, but make sure you put sealant (Flextra or
silicone) in the 4 screw holes under the microwave before putting in the screws. This will
prevent the screws from loosening due to road vibrations.
Before driving off, make sure the glass plate is in its protective packaging or completely
secured by any other protective device (large towel). If plate is not secured, it will break
and damage the inside of the microwave and could also slam on the door and create more
damage.

Table of Contents

Related product manuals